THE SYSTEM

One system. Every part fits.

Most temporary lighting is sold as separate parts. Promitto Connect is designed as one system, so strips, splitters, floodlights and emergency light all connect the same way.

THE RANGE

Plug in.
Click on the rest.

Plug in the cable from the box, then click on what the site needs. Tap a part to see it.

The Promitto Connect range. Every part links to its product page.PromittoLIGHTINGEMERGENCYSTARTConnection cable→In the box with every LED stripUp to 150 m per lineEmergency module→Takes the place of the cableUp to 100 m per lineAbout 15 % light in a power cutADD WHAT THE SITE NEEDSM-Flex GEN 2 · 25 m900 lm/m→SafeLight · 25 m1,500 lm/m→M-Flex ECO · 2 × 25 m→SafeLight ECO · 2 × 25 m→Emergency LED strip · 5 m→GreenRedBlueHighLite · 50–280 Wfive sizes→50 W100 W150 W200 W280 WT-split→Branches the line
150 m

per line from one outlet

100 m

per line with the emergency module

Mix freely

SafeLight, M-Flex GEN 2 and emergency LED strips in the same line

WHY A SYSTEM MATTERS

Less to plan, less to carry, less to learn.

Fewer outlets.

One outlet can feed up to 150 m.

Faster rigging.

Every part uses the same connector, so crews learn it once.

Easier to scale.

Add, move or reuse parts as the site changes.

Built to be reused.

Reels move from project to project, site after site.

SMALLER FOOTPRINT

Less packaging, less transport.

ECO packaging fits twice the strip in the same space, so less goes into storage and on the road.

Two reels per box.

An ECO box holds 2 × 25 m on space-saving reels.

Half the volume.

Per metre, ECO takes about half the room of a standard box.

Made to last.

SafeLight is rated for 50,000 hours and moves from site to site.

QUESTIONS AND ANSWERS

Good to know before you start.

The questions we hear most often. Anything else? Ask your dealer, or send us a message.

Plan your setup →
Do I need an electrician to set it up?

No. Promitto Connect plugs into a normal outlet, and every part clicks together without tools. You can set it up yourself, and no electrician is required.

How far can one line run from one outlet?

Up to 150 m of LED strip from one 16 A, 230 V outlet, as long as the line stays within 1,800 W. Floodlights on the line count towards the 1,800 W. With an emergency module, a line runs up to 100 m and 1,500 W. The planner works it out for you.

What happens in a power cut?

With an emergency module at the start of the line, every LED strip on the line stays lit at about 15 % of full brightness, enough to see the way out. Floodlights on the same line switch off. The SafeLight casing also glows in the dark.

Can it be used outdoors, in rain and frost?

Yes. The LED strips are IP65, which means they are dust-tight and protected against rain and water jets, and they work from −25 °C to +45 °C. HighLite floodlights are IP67 and work from −30 °C to +50 °C. The emergency module works from −10 °C to +50 °C.

SafeLight or M-Flex GEN 2: which one do I need?

SafeLight gives full working light at 1,500 lumen per metre, for places where people work. M-Flex GEN 2 gives 900 lumen per metre, enough for walkways, stairs and corridors. Both run in the same line, so you can use each where it fits.

Can I use a floodlight on its own?

Yes. Every LED strip and HighLite floodlight comes with a connection cable in the box, so each one also works on its own. To add a floodlight to a strip line, plug it into a T-split between two reels.

Can I reuse it on the next site?

Yes. The reels are made to move from project to project. Take the line down when the job is done and set it up again on the next site.

How do I work out what I need?

Use the planner. Enter the metres of light, the floodlights and whether you need emergency light, and you get the number of outlets and a parts list with article numbers. Send the list to us, or take it to your dealer.

Where can I buy Promitto Connect?

Through our dealers in Norway, Sweden, Denmark, Finland and Germany. Can't find one near your site? Contact us directly and we will help.

Plan your setup with a dealer.

Our dealers stock the system, advise on setup and deliver to site.